Besa-lighting Baaz 16 / 20 (Sconces) Manuale Utente Scaricare il pdf

FIXTURE INSTALLATION GUIDE

All electrical connections and the installation of this fixture must be in agreement with local codes, ordinances or the NEC (National Electric Code)

or CEC (Canadian Electrical Code). Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

Models using P200113 Backplate

(Interior Incandescent Wall Sconce 120V)

2NYF, Rev.1 7-10

CAUTION: Turn off power to electrical box before installing

CAUTION--RISK OF FIRE: Min 75C SUPPLY CONDUCTORS. This fixture requires that the branch supply wires be rated: MIN 75C. Most dwellings

built before 1985 have supply wire rated 60C. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR.

6695 Taylor Rd. Blacklick, OH 43004

www.besalighting.com

NOTE:

Glass Diffuser shown is for example purposes, the

actual Glass Diffuser may be different in appearance.

1. Carefully remove parts from package.

2. Remove the two Cap Nuts (A) to release

the Backplate from the Mounting Bracket (B).

3. Attach the Mounting Bracket to the Outlet Box (C)

with two Machine Screws (D) provided.

4. Extend the fixture wiring through the Canopy

then connect the electrical leads from the fixture to

the house supply wires, black to black and white to

white, and secure with wirenuts provided (E).

Attach the house ground wire to the bare copper

ground lead, then secure with the wirenut

provided (F). Push the excess wiring into the Outlet Box.

5. Align the circular openings on the Backplate and Canopy

with the Threaded Posts (G) on the Mounting Plate.

Push the Canopy and Backplate over the Threaded

Posts until the Canopy is flush with the wall, then

secure with the Cap Nuts.

7. Gently position Glass Diffuser (H) into the Backplate.

Secure with the four retaining screws (I).

Do not overtighten the retaining screws.

8. Restore power.

6. With the power still off, insert Type A15 bulbs, of not more than the labeled wattage.

IMPORTANT: Due to the natural variations that occur with handcrafted glass, it is possible the neck of the

glass will require that a smaller diameter bulb be used. If a smaller diameter is needed, use a Type B10 bulb.

NOTE:

Configuration shown is for

instructional purposes only.

Actual Socket Configuration

may vary.

1 2

FIXTURE INSTALLATION GUIDE 1

Sommario

Pagina 1 - FIXTURE INSTALLATION GUIDE

FIXTURE INSTALLATION GUIDEAll electrical connections and the installation of this fixture must be in agreement with local codes, ordinances or the NEC

Pagina 2

FIXTURE INSTALLATION GUIDEAll electrical connections and the installation of this fixture must be in agreement with local codes, ordinances or the NEC